Categories
Regular price
$332.00
$369.00
Regular price
$999.00
$1,059.00
Regular price
$332.00
$499.00
Sidebar
The Autel MaxiBAS BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity.
What Convenience Does BT506 Bring You?
Autel battery tester MaxiBAS BT506 applies Adaptive Conductance to gauge a battery’s conductance health. Compared with ordinary load testers, this technology allows multiple tests without draining the battery and to test batteries that are low or nearly completely discharged. This Autel car battery tool BT506 similarly uses Adaptive Conductance to test the battery’s partnering components, the alternator and starter to see if they can take and store a charge.
Following is the Benefits of Adaptive Conductance Technology:
* Test Accuracy Rate by 94.11%;
* Bad Battery Detection Rate by 63.55%;
* Reduce Charge & Retest Rate by 30.03%.
With the Adaptive Conductance Technology, BT506 realizes faster diagnosis and higher efficiency.
Cranking And Charging System Test
BT506 Battery Tester can test battery and also 12- and 24-volt Cranking/Charging Systems( starter and alternator), Same as BT608.
1). In-Vehicle Test:
* Battery Test:
With the clear guidance on the screen, you can do the battery test. And the battery test results include a color-coded result summary, a list of test data such as SOC, Voltage, Measure Capacity, and repair tips.
* Starter Test:
Follow the on-screen instructions, start the engine and let it idle. Then the test results of the cranking system will display on the screen which include starting voltage, starting current and starting time.
* Generator Test:
Through the alternator test, technicians are able to check the load voltage/current, no load voltage/current, and ripple. The direct test result on the screen will tell you whether the charging is normal, and whether there is an issue with the output or ripple, which helps avoid damaging the battery and shortening its life due to overcharging or incomplete charging.
2). Out-Vehicle Test:
Out-vehicle test is used to test the condition of batteries that are not connected to a vehicle. This function aims to check the health status of the battery only.
Automativally Identify Battery Type:
Clamp the BT506 to a in-vehicle battery, the vehicle information will be automatically populated and its battery information tab will pop up from the bottom of the screen, select the correct battery parameters on the screen to process the diagnosis.
* BatteryTypes: FLOODED, AGM, AGM SPIRAL, EFB, and GEL;
* Standards: CCA, SAE, CA, EN, IEC, DIN, JIS and MCA.
BT506 vs. BT508 vs. BT608 vs. BT609 Comparison
Highlights:
1.Cheaper
2. Includes Connected Cable with Clamps
3. Test 6- and 12-Volt Batteries: 100 - 2000 CCA
4. Test 12- and 24-Volt Cranking/ Charging Systems
5. Test Flooded, AGM, AGM_Spiral, EFB and GEL Batteries
6. Battery Health Report/ Temperature Compensation / Cloud-Based Service
7. Battery Ratings: Compatible with CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB
8. Support In-Vehicle and Out-of-Vehicle Testing of Passenger Vehicle Batteries
* Out-of-vehicle Battery testsing
* In-vehicle testing of Battery, Starter, Charging system voltage (not amps)
The Autel MaxiBAS BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity.
Note:
1. This is Chinese Version BT506 Which Can Not Be Used With Mobile Phone APP, If You Need One Which Can Work With Cellphone, Please Check English Version BT506 for Instead
2. The BT506 Does Not Have a Screen! To Perform Testing and Display Test Results the BT506 Must be Used with Autel MaxiSys MS906 PRO and Higher Level Tablet Tools
3. Functions of Chinese Version and English Version are Same. Nothing Different
1. This is Chinese Version BT506 Which Can Not Be Used With Mobile Phone APP, If You Need One Which Can Work With Cellphone, Please Check English Version BT506 for Instead
2. The BT506 Does Not Have a Screen! To Perform Testing and Display Test Results the BT506 Must be Used with Autel MaxiSys MS906 PRO and Higher Level Tablet Tools
3. Functions of Chinese Version and English Version are Same. Nothing Different
What Convenience Does BT506 Bring You?
Autel battery tester MaxiBAS BT506 applies Adaptive Conductance to gauge a battery’s conductance health. Compared with ordinary load testers, this technology allows multiple tests without draining the battery and to test batteries that are low or nearly completely discharged. This Autel car battery tool BT506 similarly uses Adaptive Conductance to test the battery’s partnering components, the alternator and starter to see if they can take and store a charge.
Following is the Benefits of Adaptive Conductance Technology:
* Test Accuracy Rate by 94.11%;
* Bad Battery Detection Rate by 63.55%;
* Reduce Charge & Retest Rate by 30.03%.
With the Adaptive Conductance Technology, BT506 realizes faster diagnosis and higher efficiency.
Cranking And Charging System Test
BT506 Battery Tester can test battery and also 12- and 24-volt Cranking/Charging Systems( starter and alternator), Same as BT608.
1). In-Vehicle Test:
* Battery Test:
With the clear guidance on the screen, you can do the battery test. And the battery test results include a color-coded result summary, a list of test data such as SOC, Voltage, Measure Capacity, and repair tips.
* Starter Test:
Follow the on-screen instructions, start the engine and let it idle. Then the test results of the cranking system will display on the screen which include starting voltage, starting current and starting time.
* Generator Test:
Through the alternator test, technicians are able to check the load voltage/current, no load voltage/current, and ripple. The direct test result on the screen will tell you whether the charging is normal, and whether there is an issue with the output or ripple, which helps avoid damaging the battery and shortening its life due to overcharging or incomplete charging.
2). Out-Vehicle Test:
Out-vehicle test is used to test the condition of batteries that are not connected to a vehicle. This function aims to check the health status of the battery only.
Automativally Identify Battery Type:
Clamp the BT506 to a in-vehicle battery, the vehicle information will be automatically populated and its battery information tab will pop up from the bottom of the screen, select the correct battery parameters on the screen to process the diagnosis.
* BatteryTypes: FLOODED, AGM, AGM SPIRAL, EFB, and GEL;
* Standards: CCA, SAE, CA, EN, IEC, DIN, JIS and MCA.
BT506 vs. BT508 vs. BT608 vs. BT609 Comparison
| Item | Autel BT506 | Autel BT508 | Autel BT608 | Autel BT609 | |
| Software | Operating System | × | × | Android 9.0 | Android 9.0 |
| Hardware | Screen | × | × | 5.5-inch touchscreen/ 720*1280 | 7.0-inch touchscreen/ 1280*800 |
| Processor | Cortex-M4 | Cortex-M4 | Cotex-A35 Quad-core, 1.5Ghz | Cotex-A35 Quad-core, 1.5Ghz | |
| Memory/RAM | × | × | 32GB/2GB | 64GB/2GB | |
| Battery | × | × | 3000mAh, 6H | 6000mAh, 6H | |
| Camera | × | × | 8mp | 8mp | |
| Features | CCA Range | 100-2000 CCA | 100-2000 CCA | 100-3000 CCA | 100-3000 CCA |
| Battery Type | Flooded, AGM, AGM Spiral, EFB, GEL | Flooded, AGM, AGM Spiral, EFB, GEL | Flooded, AGM, AGM Spiral, EFB, GEL | Flooded, AGM, AGM Spiral, EFB, GEL | |
| Battery Ratings | CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB | CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB | CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB | CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB | |
| Battery Voltage | 6V, 12V | 6V, 12V | 6V, 12V | 6V, 12V | |
| Electrical System | 12V, 24V | 12V, 24V | 12V, 24V | 12V, 24V | |
| Voltage Range | 1.5V-36V | 1.5V-36V | 1.5V-36V | 1.5V-36V | |
| Temperature Compensation | √ | √ | √ | √ | |
| Battery Registration | × | 53 vehicle makes | 53 vehicle makes | 53 vehicle makes | |
| Electrical Reset | × | √ | √ | √ | |
| System Detection | × | AutoVIN | AutoVIN, VINScan, Plate Scan | AutoVIN, VINScan, Plate Scan | |
| Battery Location Diagrams | √ | √ | √ | √ | |
| Battery Health Report | × | √ | √ | √ | |
| Built-in Printer | × | × | √ | × | |
| Email Report | √ | √ | √ | √ | |
| Cloud-base Service | √ | √ | √ | √ | |
| Multimeter | × | × | Optional | Optional | |
| Amp Clamp | × | × | Optional | Optional | |
| Diagnostics | All System Diagnostics With AutoSCAN | × | √ (One vehicle brand ONLY) |
√ | √ |
| All Maintenance Service Resets | × | × | × | √ | |
| Diagnostic Software Update | × | Change for additional vehicle brands and annual update | No annual update fee | Annual update fee | |
Specifications:
| Item | Description |
| Connectivity | USB 2.0, Type C |
| Bluetooth V3.0 BR/ EDR+ V4.2 LE Dual-Mode | |
| Input Voltage | 5 V DC |
| Working Current | < 150 mA at 12 V DC |
| Internal Battery | N/A |
| CCA Range | 100 to 2000 A |
| Voltage Range | 6 to 36 V |
| Working Temperature | -10°to 50° C (14° to 122° F) |
| Storage Temperature | -20° to 60° C (-4° to 140° F) |
Package List:
1set x MaxiBAS BT506
Your order not more than 100$ gets free standard delivery.Over 100$ get Express delivery.
- Standard delivered 4-5 Business Days
- Express delivered 2-4 Business Days
Orders are processed and delivered Monday-Friday (excluding public holidays)
If you have special shipping requirements,contact Customer Service first.
Related Products
Autel MaxiBAS BT506 Auto Battery...
Regular price
$179.00
