Sidebar

Autel Battery Tester MaxiBAS BT508 Update of BT506 6V 12V 100-2000 CCA Load Tester Auto Battery Analyzer Charging Cranking System,Adaptive Conductance All System Diagnostic Tool

: In stock

: Auto Battery Service

: Autel

$230.00 $239.00

Highlights 2024 NEWEST BATTERY CHECKER ANALYZERAutel BT508 automobile battery tester is designed for 6V or 12V batteries with a capacity of 100...
$230.00

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Tags:

Highlights

2024 NEWEST BATTERY CHECKER ANALYZER
Autel BT508 automobile battery tester is designed for 6V or 12V batteries with a capacity of 100 to 2000 CCA, such as regular flooded, AGM flat plate, AGM spiral, GEL and EFB , 12V & 24V cranking and charging systems. The test results based on JIS, EN, DIN, SAE, CCA, CA, MCA and IEC Standards. BT508 can provide overall analysis of batteries’ health and help you know its status in advance before it dies.

UPGRADED OF AUTEL MAXIBAS BT506
Autel BT508 car battery tester is upgraded version of Autel BT506 / FOXWELL BT705. Upgraded from Autel BT506, Autel BT508 has all the functions that BT506 offers and extra functions for battery registration for 53 makes, Electrical reset, Auto vin detection, battery health report ect. Compare to BT506/ FOXWELL BT705, Autel BT508 not only battery tester but also all system diagnostic tool. BT508 is your best battery doctor.

ADAPTIVE CONDUCTANCE, WORTH $1000+
As you know, it is vital to determining a battery’s true health. Autel maxibas bt508 professional battery tester can help you do it. BT508 comes with innovative adaptive conductance technology for more accurate examinations. It can help you ①Test accuracy rate by 96.11%, ②Bad battery detection rate by 63.55%, ③Reduce charge and retest by 30.03%, detect the battery SOH, provides reliable results of the battery’s cold cranking ability and reserve capacity.

CRANKING AND CHARGING SYSTEM TEST
 Autel BT508 car cranking and charging system analyzer supports in-vehicle and out-of-vehicle testing of passenger vehicle batteries and testing 12- and 24-volt starting/charging systems. Cranking and charging diagnostics to make sure the output voltage of the generator is in a regular condition, the rectifier diode works fine and the charging current is a normal status.

FULL SYSTEM DIAGNOSTIC & AUTO SCAN
Autel BT508 automobile battery tester can acces all available systems, such as Engine, Transmission, ABS, SRS, BCM, TPMS, Air Conditioning, Airbags ect to read / clear codes, view live data, freeze frame, ECU information ect. Auto Scan function performs a comprehensive scan of all the ECUs in the vehicle to detect faults and retrieve DTCs. NOTE: Full system diagnostic ONLY compatibility one vehicle brand. You need to pay for it if you need others brand.

Autel BT508 Car Battery Tester is Upgraded Version of Autel BT506

Autel BT508 car battery tester is powerful and lightweight battery and electrical system tester that uses Adaptive Conductance, an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health.

Why Need the Autel BT508 Battery Tester ?

As you know, car batteries lose their power and performance with time hence the need to have them checked from time to time. Autel BT508 battery load tester will help you test the health of your car's battery and remind you to keep the battery in time to avoid unnecessary damage.

Why Choose Autel MaxiBAS BT508?

  • 1.Fast Test: Deliver test results in seconds, ideal for busy shops;
  • 2.Safe Connection: Safety clamps with reverse polarity protection;
  • 3.Future Technologies: Support future battery and vehicle types via software updates;
  • 4. Innovative Adaptive Conductance: Get more accurate examinations;
  • 5. Battery & Electrical System Diagnostics: Battery Test/Starter Test/Generator Test;
  • 6. Easy Share: Print out or email reports, easy to share with customers;
  • 7. Auto Battery Registration: Battery Registration (53 Vehicle Makes );
  • 8. Auto-Save: Saves test reports automatically for later view;
  • 9. Wi-Fi Enabled: Wi-Fi connectivity to email test reports and update software.

Note: The BT508 does not have a screen! To perform testing and display test results, the BT508 must be used with a smart device that runs iOS or Android (coming soon) apps available.

Battery & Electrical System Diagnostics

The in-vehicle test is used for testing batteries that are installed in a vehicle. An in-vehicle test includes the Battery test, Starter test, and Generator test, and determines the health status of the battery, the starter, and the generator, respectively.

3 Testing Functions

  • 1.Battery Health Test - Tell if the battery is in good working condition;
  • 2.Cranking Test - see if the electrical system has enough power to start the engine;
  • 3.Charging Systems Test - check if the generator/rectifier diode/charging current is normal. This handy auto battery analyzer makes sure your summer road trips won’t end on a flat.

Innovative Adaptive Conductance Technology

Adaptive Conductance is one of the highlights of the Autel BT508. This feature was previously only available on 1000 b-u-c-k-s car battery testers.

With Adaptive Conductance technology, Autel BT508 can identify low capacity batteries or batteries that are almost completely discharged and thereby reduce battery misdiagnosis. No need to charge and retest, improves battery testing efficiency and accuracy for technicians and DIYers.

Three highlights of the function:

 

  • 1)Reduce Battery Misdiagnosis, test accuracy rate by 96.11%
  • 2)Diagnose Low Capacity Batteries, bad battery detection rate by 63.55%
  • 3)Reduce charge and retest by 30.03%

Full System Diagnostic Same As Autel BT608/ BT608E/BT609

Autel BT508 has the same all system diagnostic function as Autel BT608/ BT608E/BT609

Autel BT508 can scan all available modules including ABS, SRS, ECM, TCM, Brakes, BCM, TPMS and etc to read and clear codes, view live data stream of multiple sensors, perform active tests and retrieve ECU info.

 

  • Read Codes: This function retrieves and displays the DTCs from the vehicle’s control system. The Read codes screen varies by each vehicle tested. Freeze frame data can be viewed if available (snowflake icon indicates data is available).
  • Erase Codes: After reading the retrieved codes from the vehicle and completing repairs, erase the codes from the vehicle by using this function. Before performing this function, make sure the vehicle’s ignition key is in the ON (RUN) position with the engine off.
  • ECU Information: This function retrieves and displays specific information for the tested control unit, including model year, ECU part number and other specifications.
  • Auto Scan: Auto Scan function performs a comprehensive scan of all the ECUs in the vehicle to detect faults and retrieve DTCs.

 

NOTE: Full system diagnostic function ONLY compatibility One vehicle brand. You need to pay for it if you need others brand.

 

One-Touch Auto Registration For 53 Vehicle Makes

Autel MaxiBAS BT508 is upgraded of Autel BT506, which can support Auto Registration For 53 Vehicle Makes while BT506 can not support.

Auto Registration (after battery replacement): Auto registration is often used after the successful installation of a new battery, including BMS reset and Electric appliance reset.

After registration of new battery, it can perform vehicle systems initialization to reset the components.


Battery Management to Improve Your Efficiency

Health Status of the Battery: By directly benchmarking the battery health, this battery analyzer gives advice on whether to replace the battery.

Battery Change: The Battery Change function guides you to replace the battery step by step. The battery replacement process includes Battery Type Suggestion, Preparation, Battery Replacement steps, New Battery Test and Battery Registration.

Auto Registration (after battery replacement): Auto registration is often used after the successful installation of a new battery,including BMS reset and Electric appliance reset.

Electric Appliance Rest: When the vehicle power is interrupted when replacing the battery, and a memory saver has not been used, position settings on some vehicle components will be lost. These position limits should be relearned. The functions and related operations in Electric Appliance Reset may vary by vehicle make. Please follow the on-screen instructions to perform the desired functions.

BMS Reset: The BMS feature enables you to register a new battery after battery replacement. The BMS Reset function varies by vehicle make. Please follow the on-screen instructions to perform the desired functions.


Accessibility Help You Use Your Device More easily

 

  • Battery Location Diagram: You can view the battery position diagram.
  • Repair Reports: The Battery Test app can save a history of scan reports from your diagnostic sessions. A PDF can also be generated for the easy viewing, sharing, and printing of these reports.
  • Data Logging: The Data Logging option allows you to launch the Autel Support platform to view all recordings on the diagnostic system. The Data Logging option keeps all test records, whether submitted (Feedback) or not submitted (Not Feedback), in addition to a history of your most recent 20 test records (History). Autel support personnel will receive and process any submitted reports through the Support platform.
  • BAS Manager: The BAS Manager allows you to establish a Bluetooth connection, and to check and update the firmware version.
  • VCI Manager: VCI Manager is for connecting the MaxiBAS BT508 with a VCI device via Bluetooth. This option allows you to pair the tester with the VCI device, check the communication status, and upgrade the VCI firmware.
  • Diagnostic Software Update:Charge for additional vehicle brands and annual update

NOTE: Package includes A wireless Bluetooth vehicle communication interface enabling battery and electrical component registration. Connectivity:USB 2.0, Type C, Bluetooth V3.0 BR/EDR+ V4.2 LE Dual-Mode

Your order not more than 100$ gets free standard delivery.Over 100$ get Express delivery.

  • Standard delivered 4-5 Business Days
  • Express delivered 2-4 Business Days

Orders are processed and delivered Monday-Friday (excluding public holidays)


If you have special shipping requirements,contact Customer Service first.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Autel Battery Tester MaxiBAS BT508 Update of BT506 6V 12V 100-2000 CCA Load Tester Auto Battery Analyzer Charging Cranking System,Adaptive Conductance All System Diagnostic Tool

$230.00 $239.00